Torrent box is the coolest network design for home. You can just leave your old personal computer using Torrent, chipping away with downloads, whilst you are out working on your laptop. Once you had set up your box, you would not need a monitor, which means you can put it anywhere it will fit.
First format and reinstall your operating system. Does it on the same personal computer hard drive? You will need fairly a large hard drive as it can be done for storing purposes. It is always important to format the drive on which you will be downloading your torrent data to NTFS, and not the older FAT32 files system. The advantage with NTFS file system is that NTFS will allow you to download the files greater than four GB, constraint when using FAT32 devices.
Make it possible to create at least one shared location from your drive. Simply create a folder on your main download drive so that the download files can be easily accessible. It is important to make the shared location while using Torrent.
Download the latest version of µTorrent from its official web page and boot it up. Use Ctlr+P to bring up the Preferences dialog or you can even access it from the Options Menu. Within General tab check “Start µTorrent on System Startup”. As after installation we will not need the monitor and this means that with this setting on after installation and restart sans monitor the Torrent will automatically work without nay graphical user interface intervention. So, you can resume your torrents by simply turning on. “Enable Web UI” under Web UI and create a username and password.
Now restart your torrent box and make sure it is turned on, connected to the network and running µTorrent. You will be prompted for user name and password you have created earlier, then log in and you will reach at its web user interfaces. From here you can add, remove and manage your torrents. So, now you have µTorrent within your web browser.
You need a static IP or DynDNS in order to connect from outside of your home network. In this way you enter to the domains of remote µTorrent and you can have full access to your µTorrent from outside and from anywhere. Click µTorrent remote button on Menu Bar, and you will reach at the “remote” session of µTorrent. Now you need only add a user name and password. Shortly, you should notice “Status: Accessible” under these boxes. Now go to remote [dot]µTorrent[dot]com . Move your mouse and then fill the user name and password.
From the above descriptions we have found that torrent box is a very clean, efficient and modern way to put the old technologies in use. It costs nothing in set-up. If you have already had the media or files server then adding these torrent mechanisms to it can have added benefits. In this way you can stream line your applications and make it more modern by employing yours old personal computer settings. Remote access gives you the liberty of time and whenever you are outside then you can start the downloading and after reaching your home you cans start the work right away. It gives you the freedom to work from home and away.
Many of us have always imagined watching home while we are away. In this way one can keep an eye on home even if you are out side for urgent work. In this write up you will know, how to do it. By using your motion-detecting web cam in your house, you can keep an eye out for intruders, mischievous pets, or even pestering kleptomaniac roommates. Get a any standard web cam with USB or built-in and we will use software like Yawcam to utilize the web cam. Use your old smart phones of which ever models to this mix. Use some handy applications and most of them are free to utilize applications that let you turn your mobile work gear into extra pairs of eyes for as good as free.
Download Yawcam software; plug in your web cam and drive installed to it. Then Launch Yawcam . Go to Settings and ad your camera to it. If you have integrated web cam then select that device otherwise you can go to Change to and add USB camera out of line up. It will open a new preview window with your camera’s video feed. Then click on the window menu and select Motion detection. Here from settings you can fine tune your preferences. Click the enable button on the left-hand side of the window, now motion detection is running. From the motion detection window, click the Action tab and check “Send E-Mail”, then click the Settings menu button. Here you will send the information about simple mail transfer protocol settings. If you are a Gmail user then can give Google SMTP settings.
Then go to Yawcam’s Email Settings menu and can go for “Attach image”, then specify the email address you want Yawcam to send it to. There is the flood control setting and tweak it with otherwise your email can be flooded with completely web cam picture and make the duration of it wider connotations. There are some requirements to run Yaw cam software. You will have Java installed, DirectX 9 or later. It uses port 8888 for TCP and port 8081 for TCP and UDP traffic.
Media server is a device that stores and shares media. It may be home theatre personal computer running media centre PC or commercial web server that hosts media for a large website. These are different types of media, irrespective of their origin, are stored on media server’s hard drive. If historians were entrusting with the task of identifying the most influential and ubiquitous word that has prevalent in last couple of decades – it would be undoubtedly “”networking”. Wit the host of Gizmos that are flooded in the consumer market, there is an ever increasing need for interconnectivity and networking. In this write-up I try my best to write about torrent set up and how to utilize the old personal computer and make it the torrent server with very basic configurations. By going through connectivity, we tend to reach to the world of future where, even if we are outside we can watch our home from it and this has been deeply described wile how to use with web cam for surveillance.
Related Posts:
- Building your very own media server
- Hosting your own site
- Networks on the go
- Content management systems: Joomla and Drupal
- How to assign your computer a static IP address
- What is DNS:
0 comments:
Post a Comment